This course is designed to provide anyone involved in the design, checking, implementation and inspection of foundations, ground works and ground floor slabs with the basic knowledge necessary to perform their role with confidence. We will look at relevant sections of the Building Act 1984, Part A of the Building Regulations, British Standards and Codes of Practice, different materials and systems, ground conditions, soil types and characteristics and what to do when building near trees.  Delegates will gain knowledge and understanding of the various requirements, materials, procedures and good practice involved in foundations and ground works. It is aimed at all building control professionals, designers, contractors and site managers who require a basic understanding of the principles and practices of foundations and groundworks.

Please note: This course is split over two half days. Part 1 can be booked as a stand alone course but if you wish to attend Part 2 you must have attended Part 1. If you wish to book Parts 1 and 2 you will need to make a separate booking for each day.

CPD: Parts 1 & 2 count for 3 hours of CPD each.

Cost: Parts 1 & 2 will cost £80.00 + VAT each per delegate. You will need to book each part separately using the links at the bottom of this page.

Platform: This course will be held via Zoom. Part 1 & 2 will run for 3.5 hours including time for breaks.

Course Content & Learning Outcomes:

Part 1 - Basic Foundations (extensions and residential buildings) - For more detailed information on the course content please click here.

• Soil and soil classification
• Site investigations
• Foundation types
• Ground floor construction
• Retaining walls (small)
• Testing and tolerances
• Foundation depth calculators
• Contamination

Part 2 - Advanced Foundations (commercial, industrial, high-rise and basements) - For more detailed information please click here.

• Soil and soil classification (advanced)
• Site investigations (additional information)
• Foundation types
• Piling
• Retaining walls (large)
• Basements
• Testing, static, dynamic, integrity
• Foundation/pile calculations
• Piling - good practice guide
• Contamination

Testimonials:
"Well presented and the hand-outs were very useful"
"An excellent and informative course"
"A very interesting course that added further valuable knowledge that I can use when out on site!"
"This was the best LABC course I have been on! I learnt so much and gained a crucial insight into soil mechanics."

Who should attend:
This course is suited to any building professional who wants to get a good basic understanding of foundations and ground works.

• Architects
• Chartered Architectural Technologists
• Developers
• Builders
• Contractors
• Specialist Contractors
• Building Consultants
• Surveyors
• Public Service Building Control Surveyors

NEW COURSE

Designed for delegates looking to enhance their knowledge of the design and installation of drainage, this course covers The Building Act 1984, Part H of the Building Regulations, British Standards and Codes of Practice, different materials and systems, public and private sewerage, septic tanks and cess pools and surface water drainage.

Course content & learning outcomes

• Background and history of drainage design and installation
• Layout and terminology of wastes and drains
• Legislation and installation requirements
• Design and installation of above and below ground drainage systems
• Stack loading and thermal movement
• System ventilation
• Specialist appliances e.g. macerator WCs
• Manholes, rodding eyes and inspection chambers
• Public and private sewers
• Non-mains drainage solutions including septic tanks and cess pools
• Commissioning and testing of sanitary pipework and drains
• Rainwater system design and installation and soakaways including permeable paving solutions .
• Sewerage misconnections
• Drainage and foundations and health and safety issues
• Defects and how to avoid them

This course is aimed at all building control professionals, designers, contractors and site managers who require a more comprehensive understanding of the current practices and innovation in foul and surface water drainage.

In association with Polypipe Terrain

CPD: This course counts for 6 hours CPD.

Cost: Incredibly low price of just £75 + VAT including lunch and course materials.

Testimonials about our drainage courses

"An excellent course as an introduction to good practice."

"Very helpful and thorough course with practical examples and exercises."

"A great course, well presented and good value."

"A very informative and well-presented presentation, with a very knowledgeable presenter and interesting practical demonstrations. An excellent CPD event, thank you."

"Very informative, as a new designer / builder it opened avenues of consideration to my working practice. very good."

Who should attend

This course is suited to any building professional who needs a more comprehensive knowledge of drainage systems.

• Building control surveyors
• Architects
• Chartered Architectural Technologists
• Developers
• Builders
• Contractors
• Specialist contractors
• Building consultants

NEW COURSE

Designed for delegates looking to enhance their knowledge of the design and installation of drainage, this course covers The Building Act 1984, Part H of the Building Regulations, British Standards and Codes of Practice, different materials and systems, public and private sewerage, septic tanks and cess pools and surface water drainage.

Course content & learning outcomes

• Background and history of drainage design and installation
• Layout and terminology of wastes and drains
• Legislation and installation requirements
• Design and installation of above and below ground drainage systems
• Stack loading and thermal movement
• System ventilation
• Specialist appliances e.g. macerator WCs
• Manholes, rodding eyes and inspection chambers
• Public and private sewers
• Non-mains drainage solutions including septic tanks and cess pools
• Commissioning and testing of sanitary pipework and drains
• Rainwater system design and installation and soakaways including permeable paving solutions .
• Sewerage misconnections
• Drainage and foundations and health and safety issues
• Defects and how to avoid them

This course is aimed at all building control professionals, designers, contractors and site managers who require a more comprehensive understanding of the current practices and innovation in foul and surface water drainage.

In association with Polypipe Terrain

CPD: This course counts for 6 hours CPD.

Cost: Incredibly low price of just £75 + VAT including lunch and course materials.

Testimonials about our drainage courses

"An excellent course as an introduction to good practice."

"Very helpful and thorough course with practical examples and exercises."

"A great course, well presented and good value."

"A very informative and well-presented presentation, with a very knowledgeable presenter and interesting practical demonstrations. An excellent CPD event, thank you."

"Very informative, as a new designer / builder it opened avenues of consideration to my working practice. very good."

Who should attend

This course is suited to any building professional who needs a more comprehensive knowledge of drainage systems.

• Building control surveyors
• Architects
• Chartered Architectural Technologists
• Developers
• Builders
• Contractors
• Specialist contractors
• Building consultants

The validation assessment has been developed by LABC to enable experienced building control surveyors to demonstrate their competence in relation to building regulation fire safety in the context of high risk and complex buildings (residential and commercial). This also includes Higher Risk Buildings (HRBs) included in the draft Building Safety Bill. 

THE MEASURE OF COMPETENCY

Whilst many of you have years of experience as Building Control Surveyors there has never been a true demonstrable measure of the competency of a building control surveyor to work on complex and high risk buildings. Whilst many surveyors have qualifications and are members of professional bodies, post Grenfell this is no longer considered enough to validate an individual to work on the most complex of projects. In the near future all levels of building control surveyor will need to have their competence validated in this way in order to be Registered with the Building Safety Regulator

LABC has created an assessment to allow existing experienced surveyors to validate their fire safety competency in working on high risk and complex buildings. This assessment has been written to test four elements of competency in line with emerging industry guidance on competency assessment, namely:

• Knowledge – job specific knowledge required to perform the role / level effectively
• Skills / Experience - relevant and recent job specific capabilities or proficiencies developed (through the application of that knowledge) to perform the role / level effectively supported by peers and mentors.
• Abilities - innate capabilities required of a particular task or situation – personal skills, awareness of strengths and weaknesses and maintaining CPD
• Ethics & Professional Behaviour - moral principles and respectful and courteous business and personal conduct.

THE VALIDATION PROCESS

• STEP 1 – All candidates will be required to complete an application form. Please email certification@thebscf.org for a copy of the application form. 
• STEP 2 – LABC will review all applications and contact candidate line managers to obtain their endorsement of the application form.
• STEP 3 – LABC will confirm approval of the application via email with a link to book onto your chosen exam location. LABC members will pay a subsidised rate of £50+VAT, the remainder being covered by 2020/21 membership fees. 
• STEP 4 – Candidates sit the exam.  All examination centres will adhere fully to COVID-19 guidelines ensuring social distancing and all necessary precautions are in place. The examination is in 2 parts. The first is closed book and lasts for 1 hour. There is then a short break after which there will be a 2 hour open book examination. Due to COVID restrictions, there will be no refreshments provided,
• STEP 5 - Results will be published 8 weeks after the exam date. Results provided will be PASS/REFERRED.

All successful candidates will receive a certificate and an ID card showing that they have passed the validation assessment. Bi-annual renewal of ID cards will be subject to candidates submitting sufficient evidence of ongoing project work in relation to building regulations fire safety on higher risk buildings.

The Institution of Fire Engineers (IFE) has worked with LABC to create this assessment process and has confirmed that by passing the assessment individuals will be able to gain access to membership of the IFE (MIFireE) subject to an appropriate professional portfolio.

START APPLICATION

If you have any questions regarding the validation assessment please contact the validation team at certification@thebscf.org,

USEFUL RESOURCES

LABC Validation assessment for Building Regulation Fire Safety on Higher Risk Buildings  – what you need to know

• This document contains information of why this assessment has been created and outlines recommended reading and the structure of the examination.

LABC Validation assessment for Building Regulation Fire Safety on Higher Risk Buildings  – sample paper

• Sample paper containing example questions

LABC Virtual Learning Environment

• The LABC VLE is available only to LABC members and contains additional learning resources